喷雾干燥氯诺昔康自微乳化制剂的制备及理化性质
Preparation and physicochemical characterization of a spray-dried lornoxicam self-microemulsifying system
-
摘要: 测定氯诺昔康在含有不同量氨丁三醇的自微乳化释药系统（SMEDDS）中的溶解度，在乳糖、蔗糖和甘露醇中筛选喷雾干燥用载体及其适宜用量，制备喷雾干燥氯诺昔康自微乳化制剂，对其粒径、形态、溶出、流变性及再分散性质进行考察。结果表明：氨丁三醇的适宜用量为10 mg/g时，可将氯诺昔康载药量从7.2 mg/g提高至23.8 mg/g。适宜的载体为甘露醇，与液体SMEDDS的质量比为1∶1。喷雾干燥自微乳化粉末为近球形，具有良好的自微乳化特性，再分散后得到塑性非牛顿流体，粒径约为120 nm。固体自微乳化粉末的溶出速度在3种介质中的溶出度均极显著高于氯诺昔康片（P<0.01），具有非pH依赖性的快速溶出行为。Abstract: The solubility of lornoxicam in liquid self-microemulsifying drug delivery system (SMEDDS) containing different amounts of tromethamine was determined.The carrier for spray drying was selected from lactose,sucrose and mannitol and its appropriate amount was optimized.The obtained spray-dried lornoxicam self-microemulsifying powder was characterized by particle size,morphology,dissolution and rheological behavior.The appropriate amount of tromethamine was 10 mg/g and the solubility of lornoxicam was enhanced to be 23.8 mg/g.The suitable carrier for achieving the spray drying process was mannitol with the weight ratio of 1∶1 to liquid SMEDDS.The spray dried SMEDDS powder was nearly spherical powder with good self-microemulsifying properties.The reconstituted emulsion was determined to be a plastic non-Newtonian fluid with the particle size of about 120 nm.The solid spray-dried lornoxicam self-microemulsifying system had significantly higher dissolution than lornoxicam tablets in three media and its dissolution profile was demonstrated to be rapid and pH-independent.
-
Keywords:
- lornoxicam /
- spray-drying /
- self-microemulsifying /
- physicochemical property
-
计量
- 文章访问数: 1565
- HTML全文浏览量: 0
- PDF下载量: 2280
下载:
